Wednesday, February 10, 2010

Ethernet Over Copper Vs T1

The standard business bandwidth connection is the versatile T1 line. These connections are available just about everywhere, they offer a dedicated and reliable bandwidth and prices have been getting lower over the years. It’s hard to go wrong with a T1 line, but there’s another service that is gaining popularity that you should also consider. That’s EoC or Ethernet over Copper.

Check Ethernet over Copper pricing vs T1 line pricing now.EoC is an Ethernet WAN connection that can link multiple business locations or give you a high speed dedicated Ethernet connection. It also makes a good on-ramp to private cloud networks such as nationwide or international MPLS networks.

What Ethernet over Copper and T1 lines have in common is that they are both provisioned over multiple twisted pair telco wiring. That’s what’s in the bundle of telephone wiring that’s connected to your business now. Both T1 and EoC can use multiple wire pairs to increase bandwidth in a process known as bonding.

There are technology differences in the protocols and modulation schemes that are used to transport the signal between your business location and the closest carrier office, but you generally don't need to be concerned about that level of detail. Both technologies can transport your packets quickly and reliably. What you need to really compare is how much bandwidth you can get for a particular price level.

Where available, EoC often offers both higher bandwidths and lower prices. Part of that is due to the efficiency of the technology involved in transmitting higher bandwidths over common copper wiring. The other factor reducing prices is that EoC is often promoted by competitive carriers looking to establish a foothold or even dominance in a particular market.

What sort of bandwidths are available? T1 lines offer a rock solid 1.5 Mbps per line. Each additional line bonded-in increases that by 1.5 Mbps, so a double bonded solution is 3 Mbps. Bonding is practical up to about 10 or 12 Mbps. Above that, other solutions such as DS3 are often more cost effective.

Ethernet offers a wide variety of bandwidth options, including low speeds of around 1 Mbps, the standard 10 Mbps Ethernet that is also the basic Ethernet LAN speed, and other steps up to around 45 Mbps. That seems to give EoC a bandwidth advantage, but there’s a rub. Ethernet over Copper has distance limitations. You need to be within a few miles of a carrier point of presence to get this service. T1 and bonded T1 does not have these limitations.

If you are located in a small town, rural area or are otherwise not eligible for EoC service, there is another option rapidly becoming available called EoDS1 or Ethernet over DS1. This uses the data specification for T1 lines, called DS1, to transport Ethernet. In effect, this is Ethernet delivered over a T1 line using special interface equipment at both ends.

So what’s best service to order? The answer depends a lot on where you are located. Why not get a set of competitive quotes for your business location so you can make an informed decision? Take just a second to put in a request for Ethernet over Copper vs T1 Pricing and Availability. A friendly Telarus consultant will be happy to review the options with you and make recommendations for your particular situation. Sorry, no residential service available.

Click to check pricing and features or get support from a Telarus product specialist.




Follow Telexplainer on Twitter