Copper Ethernet Line Prices Instantly!

You’re no doubt aware that Ethernet over Copper is making a strong challenge to be the bandwidth service of choice for businesses. How much of a challenge? The bandwidth increases and cost reductions are making it hard to choose anything else if EoC is available. Just how much can you get and for what price reduction? Why not check Ethernet over Copper prices instantly!



Through the magic of the Telarus GeoQuote automated pricing system, it’s now possible to get Ethernet quotes immediately any time you want. Simply use the handy input form you’ll find at CopperEthernet.com and you’ll be automatically set up to get Ethernet over Copper pricing.

How accurate are these prices? They could be considered budgetary pricing, although they are quite accurate. GeoQuote mimics the same procedures that carriers use to make service price quotes. If you go directly to a carrier, however, you’ll probably have to wait a few days or more to get the results back. You’ll also be limited to one provider's offers. Why settle for one quote when you can get several or more to compare?

Telarus is an award winning telecom and network services broker that has agreements with dozens of service providers. You get the same or better pricing through the GeoQuote system as you could by spending hours on the phone calling around for competitive quotes.

It is well worth your while to talk to a Telarus bandwidth consultant, as there are often short term special deals available that don’t show up in the automated results. Your consultant can let you know what’s on “sale” so you can make the best buying decision. At the end of the quote process, you’ll have the option to call Telarus toll free for further discussion or just click a link and a consultant will call you promptly.

You should also know that Ethernet over Copper isn’t the only service that’s available for instant price quotes. If you wish, you can explore options for T1 and bonded T1 lines, business Cable broadband, fixed wireless broadband, Satellite bandwidth, fractional and full DS3 services and Ethernet over Fiber. Yes, quotes are available for fiber optic services from 10 to 1000 Mbps using the same instant pricing process.

Are you anxious to see how much you could be saving over your current telecom services contract? Take just a minute from your busy day and get Copper Ethernet line prices instantly. After you see the results, you’ll probably want to take a few more minutes and call in an order.

How To Reduce Your Business Wireless Costs

Are you suspicious that you may be spending a lot more on business mobile wireless services than you should be? It’s for a good reason. You most likely are. How much? Somewhere between 25 and 35%. Now, how would you like to capture that savings for your company?

I thought you would, so here’s the secret to doing just that. What you need to do is gather up all your wireless bills, go through them with a fine tooth comb to identify which plans are being used optimally and which have services going to waste, look for billing errors, find devices without any use and eliminate them, identify voice and data overages and figure out how to adjust those plans, consolidate vendors, and make sure you identify all unpublished plans and discount programs that are available for your business.

What? Do all that and still get your job done? Why, you’d need to hire a wireless expert for all that analysis and change activity. Oh, you could assign each employee the job of managing their smartphone and other wireless devices, but that’s pretty much hit and miss. They won’t spend much time on it and probably don’t know what to do next. Plus, how can you get economy of scale with everybody going in a different direction?

Obviously, you can’t make much progress without the sufficient expertise, time, and knowledge of all the products and services and their pricing that you could be taking advantage of. Fortunately, you don’t need to be an expert or hire an expert employee. You just need to bring in some expert help.

The service you are looking for is Advantix. Their specialty is telecom analysis and management, both for wireline and wireless services. Analyzing wireline phone bills is something many consulting firms do. But how many are up to speed on wireless to the point where they can expect to cut your expenses by up to a third or more?

The wireless monster has sneaked up on most businesses. They think of it as having a few cell phones around for key employees. In reality, they are spending thousands, hundreds of thousands or even millions of dollars a year... one phone at a time.

Avantix takes a comprehensive approach to optimizing your wireless business services. They’ll collect and analyze all your wireless expenses for billing errors, unused and underused services, overage situations, missed opportunities for business plan discounts, and opportunities to consolidate carriers for major savings. They’ll even go to bat for you to prepare the RFPs, evaluate competing proposals, and negotiate the contracts.

Do you really think that you are up enough on the wireless industry to know how to find every discount or opportunity for savings? Probably not, unless that’s your main business. Why not get a risk-free, no-obligation wireless analysis from Advantix and see what they can do without increasing your workload? The savings can be substantial, even eye-popping.

What Is Lowering Gigabit Ethernet Bandwidth Pricing?

If you have recently gone out for quotes on Gigabit Ethernet bandwidth, you may have been surprised by how much prices have dropped the last few years. That’s one pleasant surprise for organizations that need higher levels of business bandwidth for cloud computing access, e-commerce, medical image transmission, video distribution and the like. But is this for real and what is driving these prices lower?

Yes, it’s for real alright. In fact, bandwidth services across the board can be had for a fraction of what you may have paid when you signed your last service contract. That applies to everything from T1 lines to DS3 connections and on up through OCx SONET/SDH fiber optic bandwidth. It also includes competing services like Ethernet, Fast Ethernet, Gigabit Ethernet and 10 Gig E. Plus multi-location cloud networks like MPLS. They’ve all dropped in price. But the cost per Mbps is often most dramatic for Ethernet services.

What’s behind the lowered prices? Two factors can be credited. First is the move from traditional switched circuit transport technologies to packet switched IP networks and services. Second is new levels of competition.

Both legacy service providers, the telephone companies, and new competitive carriers have built-out extensive networks based on IP or a networking technology that embraces IP, such as MPLS or Multi-Protocol Label Switching. You can thank the Internet for that. The enormous volume of equipment and services to support near-universal demand access to the Internet has decreased the price of Ethernet and IP networking to a fraction of what it costs for competing technologies. The entire world is going to packet switched networks based on Internet Protocol.

When every LAN is running Ethernet, it just makes sense that the most efficient way to connect all those local area networks is with an Ethernet connection. Ethernet over Copper lets you do this from typically 3 Mbps on up to around 50 Mbps. Ethernet over Fiber is good for 100 Mbps Fast Ethernet, Gigabit Ethernet, and even 10 Gigabit Ethernet. Gigabit Ethernet is becoming a requirement for medium and large companies depending heavily on high productivity enterprise software or distributing media content, such as video. At the very highest levels, even 10 GigE is no longer out of the question.

The move from legacy telco technologies to IP based fiber optic networks has brought new players into the marketplace for WAN networking services. These competitive carriers have built their own regional or national fiber optic networks and established colocation facilities and points of presence in most major cities, even some mid-size cities. They can often bring their own fiber into business locations and bypass the telephone companies completely. Now instead of one option for service, you may have several or more even at the Gigabit Ethernet level. That spells competition and competition leads to lowered prices.

Could your organization benefit from the recent cost reductions in high bandwidth networks services? Don’t shake your head no until you check current prices and availability for Gigabit Ethernet bandwidth services and other bandwidth offerings. At the very least, your next service lease could cost you less than the one you have now.

Get Ready For The Recovery With Bandwidth on Demand

There is an economic recovery on the way. For some companies it may already be here. For others, it’s a dicey situation. Sure, you’re maintaining your earnings per share. But it’s being done by cost cutting, not top line sales growth. When things actually do turn, you’re going to need to move fast. But you can’t take on additional expense until your income justifies it. What to do? Try bandwidth on demand.

The idea behind bandwidth on demand is that you have the facilities to deliver all the bandwidth you need to support your operation. But you only install the facilities, not the full bandwidth service. Then you idle along at a speed that meets your current requirements and a cost that you can afford. When business picks up, you simply contact your service provider and say, “crank it up.” Your line bandwidth will increase by a factor of 2x, 5x, or 10x as per your specifications. Your cost will go up incrementally, but the increased business volume will more than cover it.

This is different from planning on a future need and getting the full capacity in place before it hits. That’s certainly a low risk approach from an operational standpoint, but it’s a high risk from a cost standpoint. What if business doesn’t ramp up as rapidly as projected? What if the marketplace takes another leg down? There you’ll be, stuck with a big expense commitment and forced to cut other costs to offset what you’ve put in place.

Bandwidth on demand services can work in both directions. You can order additional bandwidth at any time. You can also reduce your bandwidth on demand down to some base level. This way you can hedge your bets in a volatile business environment.

What types of services are suitable for bandwidth on demand? They vary by carrier, but Ethernet services are often structured in just such a way. Your bandwidth will have lower and upper limits determined by whether you have copper bundles or fiber optic cable installed as a last-mile connection.

ISDN PRI offers up to 23 telephone lines on a single digital trunk. That doesn’t mean you need to install 23 outside lines. Perhaps you are just getting a customer service contact center in place and only need 6 to 10 lines. You anticipate growth, so you’ll want to fill those additional lines as call volume increases. But for now, just get the number of lines you need to satisfy your customers.

Even T1 line service has some bandwidth options. A standard T1 line runs at 1.5 Mbps. Perhaps your application only needs half that amount. You can order a fractional T1 line for the smaller amount. Later on you’ll want to upgrade to full T1 service or even expand to 3 Mbps and beyond by bonding in additional T1 lines as you need them.

The best way to get a handle on your cost / performance options are to discuss your current and projected needs with an expert bandwidth consultant. That service is available free of charge through our Telarus telecom brokerage service. Call the toll free number or enter a quick online request at T1 Rex right now.

T-1 Digital Telephone Lines

If your business has multiple telephone lines, you may already be familiar with T-1 digital telephone lines. If not, you may be missing an opportunity to save money on every monthly phone bill. Even if you have T1 service installed now, you may not be aware of all the currently available options and the cost savings that could be yours.

Digital telephony traces its roots back to the 1950's, when the telephone companies were looking for ways to efficiently transport dozens, even hundreds or thousands of phone calls. Basic analog phone lines carry only one conversation per pair of copper wires. An analog multiplexing scheme, called carrier telephony, treated the phone lines like radio bands to transport multiple calls per pair of wires between phone company offices. Multiplexed analog trunks cut down of the number of wires needed, but suffered from noise and crosstalk problems that lowered long distance call quality.

The T-carrier system, which offered T1 and T3 digital trunk lines, has been the solution of choice for both telephone companies and larger businesses for decades. T1 lines are divided into 24 time multiplexed channels, each carrying one digitized telephone conversation. Only two pair of common telephone wire are needed for T1 telephone line. One pair is for transmit and one for receive. T1 lines start making economic sense when you have 10 or 12 outgoing phone lines. That threshold is shrinking as T1 line prices are steadily reduced, while analog phone line prices remain relatively constant.

An improved T-1 digital telephone line is called ISDN PRI, short for Integrated Services Digital Network Primary Rate Interface. It's called PRI or T1 PRI for short. PRI uses a channelized T1 line but reserves 1 of the 24 channels for signaling and digital information. The other 23 channels are available to support telephone calls. This technology has the advantage that all of the bits in each channel are used for digitized voice signals. The signaling channel serves the other 23 and makes calls connect and disconnect faster. It also provides Caller ID information, which standard T1 phone lines cannot support. T1 PRI is now the standard for business PBX systems and call centers, where multiple phone lines are in simultaneous use.

But what if you only need 4 to 6 outgoing phone lines? There is another solution called Integrated T1 service that combines telephone and Internet service on a single T1 line. You get up to 12 channels for telephone service. The rest are used to bring in broadband Internet access. A version called a dynamic T1 line automatically reassigns unused telephone channels for Internet bandwidth until they are needed. This way you can get up to 1.5 Mbps broadband speeds for upload and download but be sure that phone service is always given priority as needed. The cost of Integrated T1 service is attractive because most companies need both telephone and Internet service.

An even newer T1 line service is called SIP Trunking. SIP is the signaling protocol used by VoIP telephone systems. A SIP Trunking provider offers both VoIP telephone service and Internet access over a single T1 line. If you need more capacity on this or any of the other T1 services, you can add additional T1 lines as needed.

Are you interested in exploring the cost savings opportunities offered by T-1 digital telephone lines, or looking to see if you can save money on your current digital services, then use our Shop For T1 GeoQuote (tm) search tool to get instant online quotes so you can compare prices.

Cut Telecom Line Expenses, Not Lines

In this recessionary business climate, keeping the enterprise afloat may mean throwing every non-critical expense overboard. Soon the obvious fat disappears from the budget and managers start questioning line items once thought sacrosanct. Do you really need 10 phone lines or could everybody get by with 5? Take turns calling if you have to. What about that Internet connection? Do we really need that T1 line when those 56K modems are still boxed up in the back room?

Good grief. Cost cutting can easily go from savvy business practice to organizational nightmare when desperation sets in. It's best to start coming up with reasonable reductions before upper management gets a whiff of blood in the water and goes nuts. Think through the justification for each budgetary line item yourself and make changes you can take credit for, or at least have proposals in your back pocket.

Now here's the good news. If you can keep a cool head at least for a little while, you may be able to get the savings your business needs while maintaining the services you need to be at your most productive. The trick isn't just to slash and burn every telecom expense you come across. It's getting the same functionality for less money. You don't necessarily want to cut your lines, and with them your livelihood. You want to cut the expenses associated with those lines.

Most companies have two types of telecom line services: voice and data. Video, such as video conferencing, can fall into either the voice or data category depending on how it's implemented.

Lets start with voice services. Most businesses of any size have a PBX telephone system that manages their telco connections. There may be some room for cost savings here because of the way the system has grown. It usually starts with a few lines, adding another and another as the company need grows. Pretty soon you've got a dozen or two individual lines. Usage reports say you need them all or customers will start getting poor service and some of your employees will be cooling their heels while waiting to place a call. But you aren't necessarily married to the configuration you have today. By consolidating all those individual phone lines into one or two T1 PRI digital trunks, you'll have the same level of service but at a discount.

If you already made the move to T1 lines years ago, you might still be able to save. Competitive prices for T1 voice lines, including long distance rates, have plummeted in the last few years. By running a competitive service check you can find out if a simple change of provider could result in significant cost savings for the very same usage.

The same logic applies to your business Internet service. A T1 dedicated Internet line might now be priced at half what you paid when you signed a multi-year lease years ago.T1 prices are very favorable right now and you can make a good deal getting into a better contract. Once again, you keep the same functionality you have now but simply pay less.

You might also want to consider some newer technologies, such as MPLS networks or Metro Ethernet to interconnect multiple business locations. SIP trunking offers a way to get high quality voice and data service delivered on a single line service. All of these services have become readily available only in the last few years. If they work for your situation, you could find very substantial cost savings available for the asking.