Fiber to the Curb and Premises

By: John Shepler

Copper is rapidly disappearing in telecommunications networks. It’s replacement, fiber optic cabling, may be run through the same conduits when copper bundles are removed, or it may be trenched nearby. The old copper lines are then left to slowly return to nature, much like obsolete two lane highway superseded by newer interstate construction.

But, you say, I still have copper connections. The RJ45 cable to my computer is clearly twisted pair copper wiring. So is the coaxial cable that provides broadband to the office. Just where is all that fiber you are talking about?

Mostly Fiber Outside, Mostly Copper Inside
The quiet revolution in fiber optic transmission is occurring just out of sight. The reason is simple. Standard Ethernet cabling works great in the home or office. You can easily get 1 Gbps and perhaps even 10 Gbps performance… as long as you keep the cables short. That’s 100 meters or 328 feet for CAT5e or CAT6 at 1 Gbps and CAT6A at 10 Gbps. CAT 6 can also do 10 Gbps at 180 feet or less.

In most smaller offices you never need longer runs to get to the nearest switch or router. Since most network equipment you use every day has a RJ45 10/100/1000 Mbps interface, you’ll probably never have to deal with a fiber optic connection. That is, unless you work in the IT department in a company large enough to have one, or work for one of the telecom carriers.

Just beyond your view, the interface changes from copper to fiber optic wiring. Why? Speed and distance. If you want 100 Mbps Fast Ethernet or 1,000 Mbps Gigabit Ethernet, you need fiber to carry those high speed packets across campus and beyond. You may have copper patch cables at each end, but in-between it’s all fiber.

Fiber To The Curb
If you don't look inside the beast, you can pretend that the Internet is millions of miles of shiny copper wire in a web that covers the Earth. Actually, that’s how it started out. Today that notion is as dated as those obnoxious dial-up tones. The world’s long distance networks have long since been converted to fiber. Fiber is also rapidly replacing the local telco physical plant. When hurricanes and other disasters strike, the phone companies jump to install new fiber to replace plastic coated and even paper coated multi-pair bundles that might be many decades old. Both capacity and reliability are improved and higher speed services are possible.

Why, then, do telephone and broadband connections look the same as they always have? Someday they’ll be changed out, too, but right now it makes more sense to avoid the high cost of running new lines in from the street or rewiring old buildings. The trick to keeping the old twisted pair and coaxial cable able to meet today’s needs is to run the fiber to the junction box at the curb and connect to the existing copper. As you might guess, this is called Fiber To The Curb or FTTC. It’s a stop-gap measure that works well… for now.

Fiber To The Premises
The next logical step is for the service providers to just run the fiber right to your building and give you a fiber or copper connection at the demarcation point. For business bandwidth services, this is becoming the norm. Tens of thousands of cell towers are also being newly served by fiber optic lines. These replace the trusty T1 lines that work great up through 3G, but aren’t up to 4G speeds and certainly not 5G wireless.

This service is logically called Fiber To The Premises or FTTP. For residential service it is often referred to as FTTH or Fiber To The Home. There are two main flavors being deployed. One is active fiber that has all the electronics end to end. The other is a less expensive approach called passive fiber that uses passive optical splitters to connect multiple locations to one shared active fiber strand.

Is It Time to Upgrade to Fiber?
You can pretty much bet that whatever provider you use is running their core network on high speed fiber, probably at 40 Gbps or 100 Gbps. The question is whether they are connecting to you via legacy copper twisted pair leased from the telephone company or bringing fiber right to the premises. Cable companies use HFC or Hybrid Fiber Coax systems, so the less expensive coax broadband service joins their fiber plant nearby on a pole or curb termination box. Cable companies can also connect you directly to their fiber network for higher performance services.

The beauty of bringing fiber to your premises is that it helps future-proof your service. If you install, say, a Gigabit Ethernet port, you can subscribe to any line speed up to 1 Gbps. If you only need 100 Mbps or even 10 Mbps right now, you’ll have the option to turn up the speed quickly with only a phone call. Some providers are now letting their customers log into the system and upgrade their service themselves. Billing accounts for upgrades and downgrades automatically.

Not sure what service makes the most sense for your business? Discuss your needs with one of our expert consultants and see the range of bandwidth options available for your location.







Note: A humorous collection of tech giffts with the theme, "A Wire Made of Glass" are available through Zazzle.

Ethernet Everywhere? We’re Almost There!

By John Shepler

It’s been brewing for a long time, now. The prediction is that all of those networking standards will finally settle on just one. No more T1, DS3, OCx and whatever. It’s all going to be just Ethernet one day. How close are we to that day? Why, we’re almost there!

Network Standards Have Already Embraced Ethernet
Telcos are doing something once thought heresy. They’re abandoning their proprietary standards in favor of Ethernet services.

Why? Because that’s what the market wants. Once upon a time, there were all sorts of Local Area Network standards. Can you remember when Token Ring was the coming thing? How about AppleTalk?

Today, virtually all network equipment has one connector and it is for Ethernet. There are really only two flavors: copper and fiber. Virtually all office equipment is either 10/100 or Gigabit Ethernet over twisted pair copper. Networking equipment may have fiber connections for GigE, 10 GigE or 100 GigE.

This standardization has make connectivity extremely easy. The standardization on switched Ethernet versus the original collision domains makes networking a fairly easy plug-and-play.

The same thing has happened to networking software. The Internet standard, TCP/IP has become the THE standard, further enhancing the ease of setting up and running networks.

Getting LANs to Talk Telco
When you own the network, you get to decide how it works. There’s nobody to tell you otherwise when you come up with a design that’s based on off-the-shelf massed produced switches, routers and cabling. The big problem comes when you try to connect to the outside world.

The Internet may have been based on TCP/IP, but the wide area networks that carried it were not. Telephone company standards evolved from the world of voice only channels for telephone calls. What T1, T3 (DS3) and OCx did was simply bundle the smallest channels, 64 Kbps PCM coded telephone calls.

Digital being digital, the solution was to perform a protocol conversion at each end so that Ethernet LAN would be converted to, say, T1 for transmission over some distance and then back to Ethernet at the other end. That process still works great and many T1 lines remain in use because they are sometimes all that is available in rural areas.

What’s Going Bye-Bye?
The major telecom companies have been quietly converting their networks to Ethernet for years. In many cases, this can be simply running Ethernet over some underlying fiber protocol like SONET. Competitive carriers have built out their facilities using Ethernet in the network core and never going through the TDM (Time Division Multiplexing) evolution.

What’s going on now is that telcos are asking the FCC for permission to sunset some of their older services, especially those that run on copper and don’t have many customers anymore. The standard POTS (Plain Old Telephone Service) is an endangered species. Fewer and fewer residential users have the traditional “home phone.” They either get their phone service bundled with TV and Internet or simply depend on cellular for voice communications.

Businesses are following suit. Smaller companies may get voice and data bundles from cable companies or incumbent telcos that are acting like cable companies. Larger companies are moving rapidly to enterprise VoIP and Unified Communications. These don’t need traditional telephone wiring inside or outside the facility. Everything runs on the network. Outside connectivity is by SIP trunking, dedicated private line, MPLS networks or Dedicated Internet Access.

Is Copper a Goner?
Copper is still going, but who knows for how long. The telcos want to rid their plants of those thick copper bundles, especially the individual POTS lines.

T1 lines are still popular, but the 1.5 Mbps bandwidth is becoming more and more of a limitation. A newer standard, Ethernet over Copper, is highly competitive and offers an order of magnitude or more higher bandwidth at lower cost per Mbps.

Even so, fiber optic connections are reaching more and more business buildings as well as cellular towers. 4G and 5G wireless needs bandwidth beyond what is practical with twisted pair copper. It’s likely that all twisted pair copper may be abandoned to corrode in the ground or pulled out of conduits and sold for scrap. That’s not today in most areas, but it’s not that far away.

So, Where Can I Get Ethernet?
You can order Ethernet over Copper or Ethernet over Fiber in most populous areas right now. In rural locations, Ethernet over DS1 uses a T1 line to deliver Ethernet.

Don’t forget that Cable broadband is delivered to you as an Ethernet connection and FTTP (Fiber to the Premises) is also Ethernet at typically 1 Gbps.

Satellite and wireless Internet services are also delivered as Ethernet. That includes 3G and 4G cellular services designed for business use.

If you’ve been living with a legacy Internet or telecom connection and wondering if there is something better to choose from, there probably is now. Find out with a quick check of Ethernet services in your area and complementary consultation to help you choose the best solution for your business.

Fiber Optic Cable Gets Limber

Fiber optic and copper cable are currently vying to be the communications wiring of choice for retrofits, upgrades and greenfield construction. Actually, the long term solution is already known. It's fiber. Copper hangs on because it is already widely deployed, as are the switches and routers that connect to it.

Fiber optic cabling might have taken over infrastructure installations sooner if it wasn't for an installation restriction. You can only bend the fibers so far. It's more than just not snapping the fiber strands when the stress gets too high. There's a functional limitation with sharp corner bends that lets some of the light escape the fiber core. Attenuation goes up and signal level goes down.

That limitation has been removed by new developments from Corning. Corning's bendable fiber optic cable introduces a layer of reflective nanostructures into the cladding directly surrounding the core. The nanostructures keep the light beam from shooting out through the cladding when it encounters a sharp directional change. If you tie normal fiber in a knot or bend it ninety degrees, you might lose all of your signal. With the nanostructures guiding the wavelengths around sharp bends, the signal can handle just about anything an installation can throw at it. That includes right angle turns and stapling cable to building studs.

Where is this new single mode bendable fiber optic cable most appropriate? it's a natural for FTTx installations, especially in older buildings not designed with ease of cable installation in mind. But its also likely that this new approach to cable construction will make it the defacto standard for both business and residential wiring.

Is your business ready for an upgrade to fiber optic cabling to support data, voice and video? Or, do you simply want to expand your networks for growth or additional applications? Our network of Value Added Resellers are independent providers of equipment, installation and service. Get competitive quotes now from VARs in your area. No cost or obligation for this online service.