Can You Use 10 Gbps to 100 Gbps Circuits?

By: John Shepler

The move to business software in the cloud increased the demand for high speed, low latency bandwidth. The introduction of AI ups the ante even more. What used to be considered high bandwidth may now be an impediment to getting work done. Fortunately, higher bandwidth circuits in the range of 10 Gbps to 100 Gbps are now readily available and at reasonable prices.

What Higher Bandwidth Offers
Why increase your bandwidth to 10 Gbps or above? Because you need it. Or, if you don’t absolutely need it, the improvement in performance and productivity justify the additional cost.

The amount of bandwidth you need is driven by the traffic on your WAN or point to point networks. As long as there is enough and the quality is high enough, the lines are essentially invisible. As soon as there are more packets ready to transfer than there is capacity to transfer them, trouble begins. Your circuit becomes congested. It shows up as increased latency, as packets must be buffered to wait their turn.

Response from the Internet and cloud slows down. Telephone calls have delays even to the point of sounding like you are on a two-way radio. Some packets might get lost creating garbled audio. Same for video. Two way conferencing gets jerky or frozen and may have missing pieces. Anything in real time suffers. Frustration by users increases. Workflow slows.

What Drives the Need for Higher Bandwidth?
Text messaging and email are now the least of the bandwidth drivers. Telephone audio might be if you have a large operation or a call center. Video for conferencing and watching online streaming is definitely a bandwidth driver. Don’t forget that more and more business processes are now being conducted in the cloud or at colocation data centers. The days of everything running on a server and some disk drives in the same building are gone for most everyone. At least some of what you do is processed remotely. That could be ordering, inventory, accounting, simulation and so on.

Replacing a sea of stand-alone PCs with a LAN was the first step. Now the LAN connects to a WAN and Dedicated Internet Access. The amount of traffic leaving the building is often more than what is handled strictly inside.

Don’t Forget About Big Data and AI
Data sets are becoming huge as more and more business and customer data is electronic. You don’t need more file cabinets, but you do need more disk space, including remote backup for safety.

AI is something new that consumes data and bandwidth like never before. As staffs are being encouraged to up their inference level and use as many tokens as they can to gain skill with AI models, the load on the connection circuits increases. Training can be even more of a overwhelming load as data bases have to be uploaded to the model. All of this is a demand on your network you probably didn’t see coming. But it’s here and it is only going to increase.

What Bandwidth is Available?
Most everyone needs Internet access and the best type for most business is DIA or Dedicated Internet Access. That is essentially a private line between your office and your service provider. Most of the congestion comes in the first mile when circuits are shared among many companies and residential users to save cost. Casual and undemanding users may not even notice the difference, but highly demanding businesses can easily see variations in performance throughout the day that are largely unpredictable.

Another form of private connection is direct cloud access, which connects you to your data center or cloud provider without going through the Internet. No sharing means faster and more consistent performance.

Dedicated private lines may also be leased to interconnect your facilities directly. This is like extending your LAN to cover multiple locations. Once again, no traffic sharing with other businesses and definitely no traffic sharing with the general public. Better performance and better security.

Is your network not keeping up with today’s needs? Increase productivity and future proof your connections with Dedicated Internet Access, direct cloud access, dedicated private lines, wavelengths and even dark fiber with bandwidth from 10 Gbps to 100 Gbps and above.

10 Gbps Dedicated Internet Access Availability

By: John Shepler

Once considered a massive bandwidth suitable only for carriers, 10 Gbps is rapidly becoming the in-demand connectivity for businesses, municipalities, medical centers, content providers, and e-commerce. But is this bandwidth level readily available at a reasonable price? Indeed, it is.

Where is 10 Gbps Dedicated Internet Available?
Most municipalities have 10 Gig Ethernet readily available because of the rapid deployment of fiber optic infrastructure. Fiber is necessary to provide the bandwidth to support 4G LTE and 5G cell towers, replacing legacy T1 copper lines. Fiber is also at the heart of cable systems even though the connection to the cable modem is still coaxial copper. Cities are now installing fiber infrastructure as a utility to serve all homes and businesses.

Once you have fiber optic cables, getting Gigabit and 10 Gigabit broadband is a piece of cake. Each strand can transport 10 Gbps with only one channel. Those same strands can be set up to use multiple wavelengths to carry numerous Gigabit and 10 Gigabit services. A fiber cable can bundle a few to over a hundred fiber strands. Rest assured, there is plenty of 10 Gbps capacity to go around.

What 10 Gbps Options Are Available?
The universal service in demand is Dedicated Internet Access. Dedicated means that your connection to the Internet carries only your traffic. Any capacity that you aren’t using at the moment is idle and available. There is no competition with other companies sharing your line.

Dedicated Internet Access gives you the best consistency and lowest latency way to access the core of the Internet. This is important if your company has remote servers in the cloud or colocation hosting. It’s also key if you are doing business over the Internet and want your customers to have the best online experience.

There are also 10 Gbps private lines that connect point to point between your business locations or from your company to your cloud service provider. This is a step above using the Internet for access. Private lines give you the lowest latency and least congestion. Having a dedicated private line makes your servers seem like they are right down the hall even if they are on the other side of the country.

Cable broadband is now offering a shared bandwidth service that enables 10 Gbps in the download direction using DOCSIS 3.1 and will offer 10 Gbps symmetrical service with DOCSIS 4.0. By sharing Internet access with other users, you can save a significant amount of money, but with the vagaries of varying bandwidth and congestion.

How about wireless? In some metro areas, microwave wireless broadband can give you bandwidths as high as 10 Gbps with no wired connections. Service can be installed rapidly, sometimes within a matter of days or a week.

What About Pricing?
Fiber optic service prices used to be sky high, but that has changed in recent years due to intense competition among service providers and the economies of scale that come from having so many more customers using high bandwidths. If you haven’t checked 10 Gbps prices lately, you owe it to yourself to get a set of current quotes from multiple providers. Yes, there are likely several carriers that can meet your needs right now.

Copper Decommissioning Expands Demand for Metro Ethernet

By: John Shepler

If you are still getting by with last mile Internet over DSL, T1 lines, or Ethernet over Copper, you should take a serious look at Metro Ethernet over Fiber. You’ll get more bandwidth, better pricing and… it will continue to be available.

Copper Decommissioning is Now
Copper based telecom services have been the go-to technology for the last century, but not this century. The ubiquitous twisted pair telephone line has supported our needs from the introduction of the telephone through the fevered growth of the commercial Internet. But, like cellphones the size of a brick, the technology has run its course. Copper just can’t keep up with today’s and tomorrow’s needs.

The phone companies know this. The network operators know this. They are well aware that we are way past “peak copper”. As you read this, copper lines nationwide are being retired or “decommissioned”. In some cases the copper is physically ripped out of conduits so that fiber optic cables can be pulled right back in. In other cases the copper bundles in the ground are simply disconnected and left to rust away on their own. In the coming years there will be fewer and fewer copper options available to order, until a copper wireline is as rare as a cranked telephone set.

Fiber is the Future AND the Present
The replacements for copper telco right now are Cable in the form of hybrid fiber/copper systems, Fixed Wireless Access, and Fiber Optic bandwidth. Fiber in cities is also called Metro Fiber or Metro Ethernet. Most urban, suburban and even small town businesses now have access to Metro Ethernet and its flexible options.

Fiber is your most flexible option for several reasons. First, fiber optic strands offer extremely high bandwidths, to 10 Gbps or more. With wavelength division multiplexing, you might get a dozen or more 10 Gbps lambdas, each a virtual fiber in itself. Now, consider that nearly all fiber cables have multiple strands, even dozens, and you can see how fiber bandwidth is nearly unlimited. Once installed, that fiber will likely last as long as you need.

Second, fiber, unlike cable or most wireless, can provide exclusive dedicated line services. You can order private point to point connections and have all of the bandwidth available for your traffic. Compare that to the consumer-oriented broadband services that share bandwidth among many users to keep the cost down. With dedicated Internet access or private point to point lines, you won’t be competing with everybody else for limited resources at high traffic times. This can be especially valuable in connecting your network to a distant cloud provider that hosts business critical applications.

In addition to massive available bandwidth, fiber service is also very scalable. You can typically start off as low as 10 Mbps at pricing comparable with a current T1 line, but with over 6x the bandwidth. Many smaller businesses find that 100 Mbps is plenty, but Gigabit bandwidth is easy to come by and very affordable. If your applications demand it or your workforce is substantial, 10 Gbps is easily available on fiber. Even 100 Gbps is now being offered to larger companies and hospital complexes, content developers, etc.

Why Ethernet over Fiber
The earlier implementations of fiber optic service were based on a telephone company standard called SONET that offered fixed bandwidth levels and was designed for voice calls, not data. While protocol conversion circuitry made SONET the backbone of the Internet, Carrier Ethernet is now the standard to be embraced. This is the same switched Ethernet that runs on your local network, but extended to transport packets over hundreds or thousands of miles.

Metro Ethernet uses the Carrier Ethernet standard running over fiber optic cabling. This makes it virtually plug-and-play with your network. You can even set it up so that your business locations all over the state or country act like they are on one big network. Metro Fiber Ethernet is the new standard for business connections. Network connections within the metro area are often referred to as MAN or Metropolitan Area Network, while those more distant are referred to as WAN or Wide Area Network.

Are you ready to replace aging T1, DS3, DSL or other network services with something more modern that is future-proof and likely less expensive? Check your Metro Fiber Ethernet options for one or more business locations now.

10 Gigabit Ethernet WAN

By: John Shepler

As business becomes more online and companies relocate IT operations to the cloud, the need for WAN bandwidth has steadily increased. Today it is not uncommon for even smaller operations to need 100 Mbps to 1 Gbps of reliable dedicated Internet and inter-office network bandwidth. Medium and large companies, especially those with highly technical products and services or medical imaging, can easily keep Gigabit connections busy. It may well be time to move up to 10 Gigabit Ethernet WAN.

Types of High Speed WAN Networks
Very high bandwidth connectivity tends to break down into two categories: Dedicated Internet Access and dedicated private or virtually private lines.

Dedicated Internet Access connects your business location to the Internet through a highly reliable, usually fiber optic, broadband connection. It is called “dedicated” to distinguish it from shared bandwidth services such as cable, DSL, satellite, and cellular wireless services. Dedicated means that all of capacity of the line is dedicated to your needs. There is no competition from other users over this connection.

The Internet, certainly, is a shared resource and your packets are competing with everyone else’s online. There is no way to give yourself priority or to designate certain services such as latency sensitive VoIP phone calls and video conferences as more important than run-of-the-mill file transfers. Usually, though, employing a dedicated access line greatly improves your Internet experience because most of the congestion tends to be in the “last mile” connections to the end users.

Even so, you may want to bypass the Internet for business critical applications such as call centers, core cloud services and the like. You need a direct connection from your location to your service provider, who may or may not be located in the cloud. You may also wish to interconnect your own business locations via a private network of dedicated lines.

Content Delivery Networks
Another type of “private Internet” is the content delivery network. Studios and other video content providers have found that the Internet may not always be able to handle the number of simultaneous high definition streams that users demand. A way to improve performance for the end user short of a direct connection is to deliver the content to the Internet at a point closest to the customer. Entire private networks with multiple geographically diverse server locations are interconnected and then terminated at “Points of Presence” near the users.

Content Delivery Networks need to be very high speed to handle the amount of streaming traffic at a given time. 10 Gbps bandwidth could easily be a minimum, with needs expanding to 100 Gbps connections and more possible.

Content Delivery Networks aren’t just for high volume video steaming. They are also useful to make websites more responsive and easier to handle surges of requests by distributing the content of the website to servers nearer the users. By spreading the load geographically, response time is better and no one server becomes overloaded.

MPLS Networks
A Multi-Protocol Label Switching network is a privately run multi-user network that also helps companies get their most critical operations off the Internet. The advantage of a MPLS network is that it has regional, national or even international points of presence. You only have to supply the line from a particular business location to the nearest network POP. The network operator takes care of the long haul connections between POPs.

As you might guess, the big advantage of MPLS networks versus running your own private network is cost. Unlike the Internet, MPLS performance is guaranteed. The label switching protocol that is employed on the network for traffic control is not hackable using standard Internet Protocol tools and access is limited to paying customers, not the general public. This provides an extra layer of security for your data.

Where Do You Find 10 Gbps Connections?
Until recently, 10 Gbps bandwidth was considered high enough that it was only needed for carrier core networks and the largest business users. The original telco fiber optic standard was OC-192 at 10 Ghz, with 40 Gbps available as OC-768.

A newer standard is Carrier Ethernet that is easily scalable over fiber from 10 Mbps to 100 Gbps, with 10 Gbps readily available today. In some locations, 100 Gbps Ethernet WAN connections are available for the most demanding applications. It’s likely that this service level will be common in years to come with the next advancements being in the Terabit per second range.

If your location or one nearby is lit for fiber optic service, you can likely get 10 Gigabit Ethernet fairly quickly. In some metro areas, 10 Gbps service is also available using point to point line of sight microwave. This makes the service even faster to install and potentially avoids high construction costs of brining in fiber if it isn’t installed already.

Do you have a need for very high bandwidth connections that are also highly reliable and low in latency and packet loss? If so, see what 10 Gigabit Ethernet WAN services are available for your business locations.

Lower Cost Last Mile Fiber

By: John Shepler

What is the most critical part of the Internet? To you, the user, it’s that last mile connection to your place of business. That’s usually the limiting factor and where most of the problems are. What you need is a better connection, and fiber is the gold standard.

Last Mile Limitations
Don’t get me wrong. There are no guarantees on the Internet. Your priority is the same as everyone else’s. When nodes get congested or name servers go down, the people connecting on a shoestring and the well-healed are both affected. That said, the Internet has matured to the point where the backbone networks are highly reliable and have plenty of bandwidth.

If you need the ultimate in connection quality between multiple business locations, you need to look to private solutions, such as point to point dedicated connections and MPLS networks. These have much stricter control of bandwidth, latency, jitter and packet loss. They are pricey and they don’t connect to the general public. That’s why the Internet is indispensable for nearly all businesses for sales and customer service.

The last mile connection is where pricing and quality vary all over the place. The biggest differentiator is shared vs dedicated bandwidth. Dedicated bandwidth means that you have exclusive use of the line capacity. What you don’t use simply idles until it is needed.

Seems like that’s the way it should always be, but the Internet wouldn’t have expanded geometrically the way it has if everyone had to pay for a dedicated line. Instead, carriers such as cable and wireless companies, buy high capacity dedicated lines and then multiplex them to share among many users. The idea is that not everyone is online at the same time and even if they are, most are not uploading or downloading at a given moment.

Prior to so many people working at home, most of the heavy consumer activity took place in the evening and business use was limited to daytime. Now, daytime demand is heavy for everyone using shared bandwidth. When it gets too heavy, line speed for everyone is reduced until the load lightens.

Dedicated High Speed Connections
Your best performance will come through a dedicated, symmetrical high speed link. Symmetrical means that upload and download speeds are the same. That tends to be case with dedicated lines. Shared bandwidth tends to be asymmetrical with much higher download than upload speeds.

You also want to connect through a top tier Internet Service Provider. These are larger companies that pay to connect directly to the Internet backbone. Smaller ISPs pay transport fees to the larger companies to connect through them to the Internet. It’s one more link in the chain.

You can get dedicated lines in both copper and fiber technologies. There are some microwave service providers who can deliver an equivalent connection wirelessly. These tend to be short range line-of-sight connections in major metro areas.

Copper solutions include the traditional T1 and DS3 (also called T3) lines. Newer technology is Ethernet over Copper which uses the same twisted pair cabling as T1 lines, but can support much higher speeds, although bandwidth tends to decrease with distance to the central office.

Fiber used to be a rare and expensive proposition, but that has all changed in recent years. Even cable companies have deployed fiber as their main transport network and some will sell you dedicated fiber optic Internet connections in addition to their more typical coaxial copper shared bandwidth services.

Fiber solutions include traditional telco Optical Carrier services such as OC3, OC12 and OC 48. The newer technology is Ethernet over Fiber. it’s generally much less expensive and highly scalable. That means you aren’t stuck with the bandwidth you first installed. You can start off with 10 or 100 Mbps and easily scale up to 1 Gbps, 10 Gbps or even 100 Gbps as the need arises. That alone is a great cost saver. The competitive nature of today’s fiber marketplace has greatly reduced the price of bandwidth far below what you might expect.

The buildout of cellular towers for 4G LTE and 5G has created a fiber construction boom. Many buildings have also been connected by fiber for business use. These are great places to have an office because the heavy construction costs of bringing in fiber have already been paid. If you don’t have fiber in your office yet, it may still cost little or nothing to bring a fiber bundle in. That’s because there is likely a point of presence fairly close and carriers each want to be first to “light” a building and garner the business of the tenants.

Do you need a reasonably priced highly reliable last mile connection to the Internet? Get multiple competitive quotes now and see how much bandwidth you can really afford.