Redundant Internet Connections Keep You Online

By: John Shepler

The Internet has become so ubiquitous that we take it for granted. It’s a utility, like gas, water and electricity. It’s always there quietly and efficiently running in the background… until it isn’t.

The Danger of Single Point Failure
Any time we’re dependent on one key element, we’re subject to what is called “single point failure.” Your entire business could be running like a well oiled machine, with orders being fulfilled and customers pouring in. It’s high efficiency and high profits. Then, the connection goes down and stays down. Computers do nothing. Point of sale terminals are frozen. Business grinds to a halt.

Somewhere, somehow the Internet has stopped cold. But it’s designed not to do that, right? Indeed it is. The technology behind the Internet was designed by the military to keep functioning during a nuclear attack when whole areas were vaporized. No one cable or router can stop the data flow. It simply re-routes to paths that are still functional. Well, except for that last connection. You, know. The one that hooks your business to your Internet service provider. How many lines is that? That’s right… ONE. What happens when that gets cut? Right again. Service to and from the Internet stops cold.

The Value of Redundancy
Redundancy is what protects you from single point failure. For things that are so critical you can can’t do business without them, you need a backup. When you have a primary connection and a backup you have redundancy

A simple example of redundant connections is found with many home based businesses. As a solopreneur, you probably can’t justify having a second fiber optic or cable service just in case one goes down. But you likely do have redundancy. Your desktop computer is connected through the router and modem to the ISP. Rarely do you lose service, but it does happen. What then? No need to call up and order another service, you already have one on your phone. Simply use the personal hotspot feature with your phone to supply cellular broadband to your computer and you’re back in business.

There are a couple of fine points here. First, you wan’t to get back to your primary service as quickly and you can or you may get overage charges on your cell phone bill. You typically get only so may GBs per month before they start tacking on extra fees. Second, is your primary Internet service a Fixed Wireless Access from the same provider as your phone service. That might be a great money saver but likely not a redundant connection. If the tower you are accessing is off the air, your phone goes dead and your FWA goes dead at the same time. What’s left to do? Pack up the laptop and head for a hotspot. Hopefully that coffee shop has a different ISP and is still Internet ready. Best to check before you settle in and order.

Robust Business Redundancy
Most businesses don’t have the option to flee the office or store and head out for a break to get reconnected at the nearest hotspot. It makes a lot more sense to have redundant service connections with enough speed to keep running no matter what. Also in most offices it isn’t practical to have everyone pair their PC with their smartphone, although that can work for a short period in some cases. It’s better to have a second redundant service available for the network you already use.

What are some things to think about when setting up this redundant connection? Ideally, you want at least automatic failover. That means when one line goes down, the other picks up the load automatically. This is similar to the way a battery backup power supply works. When the line drops, the battery powers an inverter and the computer doesn’t even blink.

Even better than automatic failover is having a dual or multi-port router that can automatically share the load or pick and choose what route to send each packet for best performance. That’s SDN (Software Defined Networking) or SD-WAN (Software Defined Wide Area Network). The beauty of this approach is that instead of one line sitting idle until it is needed, you can make use of all the available bandwidth all the time. Only when one connection goes down does the total bandwidth available get reduced for the duration of the outage.

A good SDN supplier will ensure that you have truly redundant services, but here are a few guidelines if you are going to set this up yourself. First, don’t just have a pair of lines going from your location to your iSP using the same route. Chances are they run in the same bundle. If a backhoe cuts the bundle, you lose all your connectivity at once. Instead, use diverse pathways so that no one disaster can take out all your lines.

You may also want to have different providers for each service. They can be fiber, cable, wireline, fixed wireless, or satellite. At least use two different providers and you may want to consider two different technologies that are unlikely to be affected by a particular outage… be that wire cut, storm, or power loss. It’s valuable to have battery, generator, or solar power backup for your own equipment as well as redundant Internet.

Have you experienced Internet outages or concerned that a sudden loss of service could damage your business? If so, speak with a technology expert and see what redundant Internet options are available for your situation.

The Connectivity You Need For Digital Transformation

By: John Shepler

Most every business is now in some phase of digital transformation. It’s the process of moving from analog mechanical and paper based operations to digital and online processes. The promise of this transformation is faster and more efficient business methods that save cost and expand your customer base. But, what do you need to put in place to support this digital transformation?

Plan on Doing Most Everything Online
While most products and services are not digital, the tools to support them now are. Everything from finding prospects to converting prospects to customers, servicing those customers and keeping the products flowing has a digital element to it. The Internet is now the hub of operation for many businesses. Others may be local and walk-in for the most part, but may have an online presence and accounting or other processes in the cloud.

What makes the Internet so compelling is that after a decades of development, it is largely in-place, paid for, and ubiquitous. People who don’t even have bank accounts do have smartphones with Internet apps that allow them to buy, sell and get paid. While there are challenges, especially in the area of security, the Internet is a must for most companies.

Start With High Speed Reliable Internet Access
You’ll need a solid connection to the online world. It will have to be fast enough to be transparent to you and your customers, always available, and have a minimum of latency, jitter and packet loss. The best connections are the ones you never have to think about. That customer on the other side of town or the other side of the world will seem as close as someone in the next office.

There are basically two types of broadband connections. One is called Dedicated Internet Access. The other is Shared Internet access.

Dedicated Internet Access, particularly with symmetrical bandwidth that gives you the same speed uploading as downloading is the gold standard. While the Internet is certainly a shared resource, most of the congestion and outages occur in that “last mile” between you and your service provider. Dedicated connections give you a private road to the Internet. You always have the bandwidth you are paying for, whether you are using it every second or not.

Shared Internet Access is just that. A service provider leases a dedicated access line and then divides it up among many users. If the speed is high enough and there aren’t so many users demanding the same bandwidth simultaneously, you may not even know you are sharing. Sometimes, though, everybody wants to download videos or large files and things slow down. Then, like every traffic jam, they just as mysteriously dissipate and everything is back to normal.

The advantage of dedicated access is performance. The advantage of shared access is cost. Shared services such as cellular and cable broadband can cost a fraction of what a similar speed dedicated fiber or fixed wireless access service costs.

A Hybrid Approach to Increase Reliability and Lower Cost
There is also a third option that has been recently developed. That is the Software Defined Network (SDN) or Software Defined Wide Area Network (SD-WAN). What these systems do is take multiple Internet connections and bond them together so that you get one higher capacity, lower latency and more reliable connection. A SD-WAN box can combine a cable broadband line, a cellular broadband modem, and a small fiber optic service. Even satellite and landlines can be included. The software in the controller monitors each line constantly and selects the most appropriate for every packet.

With SD-WAN, your most sensitive applications, such as telephone and conference calling, get the highest priority for speed, latency and jitter. Business process are next in line. Less sensitive needs, like remote backups, get the lowest priority because a few seconds here and there probably won’t make any difference. SD-WAN can save you money compared to one very large fiber line that you can’t keep busy or perhaps can’t even get installed. It is also a lifesaver when one line is accidentally cut or has an equipment failure. SD-WAN will simply use the other connections to keep things running seamlessly.

Don’t Forget Your Cloud Connections
Your main office, store or factory connection to the Internet is critical, but so are the connections for your cloud based operations. Once those servers and applications leave the premises to be co-located elsewhere or run in a public or hybrid cloud, they need the same reliable and transparent connectivity you had in-house.

There are two connections to be concerned with. The first is the connection between you and the cloud. This may be the same Internet access you use for everything else, but for business critical operations you may want to consider a dedicated private line between your office and the colocation center or cloud service provider. This bypasses the Internet completely and gives you much greater control of your traffic since nothing is shared outside of your business.

The other connection of importance is the connection between the remote servers in the colo center or cloud and the outside world. For this you want the same high performance Internet access with enough bandwidth, low latency and minimal jitter and packet loss. Fortunately, this quality of service is easy to find for colo and cloud, as they deal in massive amounts of bandwidth on a regular basis.

Are you properly connected for digital transformation? That old DSL line or bandwidth limited T1 probably won’t get the job done anymore. Consider an upgrade to highly reliable fiber or wireless broadband for your business. Recent buildouts have made this much more affordable than you might expect.

Can Satellite Be Part of Your SD-WAN?

By: John Shepler

Software Defined Networks (SDN) or Software Defined Wide Area Networks (SD-WAN) are being implemented more and more to provide high quality business bandwidth at lower costs. In some cases, SD-WAN is the only way to get decent bandwidth levels in rural and remote areas. You might think of these software defined networks as a potpourri of different connection technologies, but it’s more than that. it’s an intelligent approach to making the most of every connection available, including satellite.

Why The Need For SD Networks
Say you want to connect to the Internet or to your cloud service provider. Traditionally, you’ve done that by ordering up a “last mile” connection from your business location to the Internet or a private point to point line between two locations, such as your office and your cloud provider.

That’s great as long as there are providers who can give you all the bandwidth you need and at a price that won’t choke your business. The problem is that you often overpay for premium bandwidth that goes unused or settle for what the budget can handle and regret the performance limitations every day.

In reality, different tasks have different connection requirements. Telephone lines for a call center or even ordinary office use don’t need tremendous amounts of bandwidth but are highly sensitive to latency, jitter and packet loss. Backing up files to a remote data center or storage in the cloud is fairly insensitive to the latency, jitter and packet loss characteristics but needs lots of bandwidth to get done in a reasonable time.

This is where SDN / SD-WAN work their magic. An intelligent processor acts as a traffic manager for each and every packet entering the network. Those voice packets get routed to a dedicated high performance but limited bandwidth circuit like like a T1 or ISDN PRI. File backups can go via cable broadband or as lower priority on the T1 or fiber optic line. Business applications in the cloud need reliability and quick response. They’ll go over a high performance connection.

How SD Networks Optimize Cost
The processing power within the SDN controller makes note of what each type of traffic needs. You’ve told it that. The processor is also constantly monitoring the status of each connection that you’ve provided it. It can truly be a potpourri of T1, DS3, cable broadband, 4G and 5G wireless, Point to Point Microwave, Ethernet over Copper, Ethernet over Fiber, SONET, MPLS networks, DSL, and two-way Satellite.

What’s key is that the controller knows at each instant how each connection is performing. Low cost connections aren’t always low performing. That DSL or cable link might be zooming along right now. The low cost usually comes from these being shared rather than dedicated connections. Other users, not in your company, can be hogging bandwidth and creating congestion to slow you down.

Satellite may well have excellent speed and low packet loss. The geosynchronous satellites now in service do have long latency times that can’t be avoided. That can be an issue with voice and video conversations, but makes little difference for file transfers or downloaded video.

Wireless connections in general have usage limits simply because wireless bandwidth is a scarce resource. SDN needs to be mindful of that in assigning the connections to avoid bandwidth slowdowns or additional charges.

The point is that you don’t need to buy the most expensive bandwidth solution in many cases. You won’t be able to load up that line 100% of the time with traffic that absolutely needs it. SDN / SD-WAN can ensure that your costly connections get used to the max but offload traffic that doesn’t need such high performance to a lower cost link. You also gain the advantage of automatic failover in case one of your links fails.

When Availability Is Most Important
There are many locations in rural America where you can stand outside and waive a fist full of money to buy connectivity and have no takers. This is where an SD network solution can really help. The newer high bandwidth satellites offer fast speeds and quality connections. You can include a dedicated SIP trunk based on a T1 line for your VoIP phone calls to get around the latency issue. it is likely that cellular broadband is also available in most areas. Combine these and you may well get all the bandwidth you need with the performance you also need without having to pay a fortune to bring in a fiber cable… if anyone will even do it.

Are you frustrated with either the cost of connectivity or its availability? This would be a good time to look into SDN / SD-WAN solutions that can give you the performance you need at a cost you can afford.

Various Flavors of Business Internet Access

By: John Shepler

You might think that the Internet is the Internet, but how you connect to it makes a big difference in the performance you experience. What is your best bet? Is it Dedicated or Shared Internet Access?

What is Dedicated Internet Access?
There are actually two ways to connect to the Internet. One is Shared Internet Access, which is the basis of consumer and most wireless services. The other is Dedicated Internet Access or DIA.

Dedicated Access is similar to how you run your own in-house network. You have ownership and control of the bandwidth. No other company can come in and hog your bandwidth. If you allow vendors or customers to connect to the network, you control that access so you decide who can use what resources.

You don’t own the Internet. Nobody does. The core of the Internet is an extremely high bandwidth infrastructure provided and operated by Tier 1 telecom carriers. Smaller carriers and local Internet service providers pay to have their traffic carried through the core. What you want is performance closest to what is experienced in the core. That’s dedicated access.

How Does Dedicated Internet Access Work?
You contract with an incumbent or competitive telecom carrier for a line that connects through their network core to the core of the internet. All the traffic on that line is under your control. Once it enters a carrier’s network you depend on their expertise and abundance of resources to ensure that you’ll have adequate bandwidth without congestion, latency, jitter or packet loss.

Isn’t Shared Internet Access a Better Deal?
Shared Internet Access is a much lower cost option for one simple reason: It’s shared. Here’s how that works. An Internet Service Provider who sells directly to consumers and small businesses leases a Dedicated Internet Access line, usually a fairly high bandwidth fiber optic line. That provider then multiplexes or divides that bandwidth among many customers. The maximum bandwidth you can use is rate limited to the plan you purchase.

Of course, the actual bandwidth you experience depends on how many other customers are online at the same time and what they are doing. There can be lots of users browsing the Web and not slow each other down. If many users are downloading video or large files from their cloud providers, the total bandwidth will exceed the capacity of the provider’s line and each customer will only get a fair share of that line. Providers can’t provision enough capacity for worst-case traffic conditions and keep the price reasonable, so you can expect your bandwidth to vary.

So, you have a decision to make. If you don’t use cloud services or have a requirement for constant high performance to ensure employee productivity, you might well benefit from the cost savings of cable broadband, satellite, or cellular broadband.

When Even Higher Performance is Required
The Internet is the Internet and it was designed to be robust in maintaining connections and not focused on bandwidth, latency or security. Congestion can happen even in the core and performance can vary on a minute by minute basis. Even a dedicated access line can’t change the inherent nature of this public resource.

The way to improve long distance network performance is to stay off the Internet for everything that doesn’t need it. Have a direct connection to your cloud service provider for business processes and certainly for VoIP telephony or Unified Communications. Use private point to point lines to connect business sites outside your headquarters. A usually acceptable option is the MPLS network, which is a form of privately run Internet. There are multiple users on this network, but the net is run to ensure every customer has all the resources they need. MPLS networks do not connect to the general public, so you will still need the Internet to interact with most customers.

A newer technology that improves Internet performance is the SDN or Software Defined Network, also called a SD-WAN or Software Defined Wide Area Network. This is a system that integrates multiple Internet access lines and manages them to assign the highest performance paths to the most critical functions. You can plug-in a dedicated T1 or Ethernet line, a cable broadband line, a 4G or 5G wireless modem or a two-way satellite transceiver and let the SD-WAN box decide which packets go where. It gives you redundancy so that you almost always have Internet access and can cost less than a dedicated high speed line that might not be used to capacity all the time.

How do you need to connect to the Internet? Will Dedicated or Shared Internet Access work best? Find out what bandwidth options and pricing are available for your business locations.

Can SD-WAN Solve Your Low Bandwidth Problem?

By: John Shepler

Can SDN or SD-WAN solve your low and unreliable bandwidth problem? Hey, you can probably solve your bandwidth problems right now by upgrading to a dedicated higher bandwidth service with a service level agreement, such as Ethernet over Fiber from a top-tier carrier. A better question is how can SD-WAN give you faster and better bandwidth at a more affordable price point?

The Cause of Low & Unreliable Bandwidth
Companies with bandwidth woes generally fall into one of two categories. The first is being stuck with bargain basement options because of very limited budgets. The other is being frustrated because the service needed isn’t available in that particular location at any cost.

The really low cost options tend to be broadband services that were designed for the cost sensitive consumer market and then re-branded for business. These include DSL and cable broadband certainly, but may also include cellular wireless and some two-way satellite.

What these services have in common is that the bandwidth pool is shared among however many users are online at the moment. That makes your speed fluctuate during the day. They also tend to be Internet only. If you want point to point you have to set up an encrypted tunnel with VPN or take your chances on security. Finally, they tend to be offered as “best effort” information services with no uptime or performance guarantees.

Are All Non-Telecom Regulated Services Low Quality?
No. That’s unfair and untrue. Cable speed and performance has grown by leaps and bounds, especially since the introduction of DOCSIS 3.0 and now 3.1. You can get fiber speeds at bargain prices in most populated areas. Reliability tends to depend on the local service provider. Some have almost perfect uptime. Others are less dependable.

Likewise, cellular wireless and satellite have experienced technology upgrades over the years. Both suffered from low bandwidth, congestion and spotty service. That’s not much of a problem anymore. With 4G and now 5G wireless, fiber-like bandwidths are becoming commonplace with solid service. Satellite, too, is now 100 Mbps nationwide with gigabit service on the way. Spot beams provide highly reliable fade margins.

Both cellular and satellite do have limitations, however, Satellite has a latency issue that won’t be overcome until the Low Earth Orbit constellations are in place. Both services are bandwidth limited by the amount of spectrum available, so there is only so much to go around. That means data limits to keep some users from hogging the scarce resources. If you hit the limit, you either pay more or have your bandwidth throttled for the remainder of the month.

Just What Can SD-WAN Do About These Limitations?
SD-WAN or Software Defined Wide Area Network, part of the Software Defined Network (SDN) technologies, can’t change the laws of physics, provider unreliability, or service availability. What it can do is manage a collection of limited performance bandwidth options to create a single higher performing network.

This works because not every connection you have will have the same latency, packet loss, speed or reliability. Besides the inherent differences in technology, performance often varies moment to moment. Sometimes the cable runs blindingly fast. Sometimes it’s all clogged up. Same with wireless, satellite and even DSL.

No human can sit there with a switch and direct traffic fast enough to send each packet down the best or most appropriate path by the instant. A computer can. That’s what SD-WAN is all about. A processor running software monitors multiple links. It then follows a plan for where to route traffic and it keeps track of it all.

The Other SD-WAN Secret
Another thing that makes SD-WAN effective is that not all traffic is equally demanding. VoIP voice calls are extremely sensitive to latency and packet loss. Data file backups aren’t. Many cloud based business applications need high performance all the time. Some aren’t all that fussy. With that in mind, a SD-WAN controller can see what demands there are for service, what paths are available and with what instantaneous performances. It can pick and choose where to route traffic for the most optimum use of the resources you have provided.

Your choice of SD-WAN links might include DSL, cable, T1 lines, satellite, 4G or 5G wireless, point to point microwave, Ethernet over Copper or Ethernet over Fiber, and even SONET fiber optic lines. The right mix depends on what performance you must have, what connections are available and your budget for bandwidth.

Are you struggling to do business because your current bandwidth solution just isn’t getting the job done? You should know that you have more options now than ever before, especially since SD-WAN became available. Tell a network bandwidth consultant about your particular business needs and see if you can do a lot better than what you are living with now.






Business products with the WAN Man theme are available through our Zazzle Gigapackets store.

WANs That Act Like LANs

We take our Local Area Networks (LANs) for granted. Every business has them, but they are seldom seen except for that network connector on the wall. You plug-in your computer, printer, phone, etc. and it just works.

Networks vs Utilities
In a way, LANs are now the data equivalent of AC power. You don’t think about it. You just use it. Connections and operations were long ago standardized. You don’t worry about different flavors of Ethernet any more than you stop and think what voltage is coming out of that wall socket.

Now, how about those Wide Area Networks (WANs)? It’s the WAN that gets you out of the building and connected to your other business locations, your cloud services and everyone else in the world. We don’t think about the fact that electrical power is transformed to higher voltages and that there are switching centers between your location and the power generation. It’s just as invisible as the wires running through the walls. If only Wide Area Networks worked the same way (sigh!)

The Difference Between LANs and WANs
The big difference between local and metro or wide area networks is that the local nets tend to be invisible and the longer haul connections may not be. You probably don’t have to be concerned about bandwidth, jitter, latency or packet loss on an in-house network. Wired LANs, especially, do a good job of keeping these issues out of your way. As you leave the premises, those characteristics degrade. Ideally it is not enough to get in your way, but sometimes it’s a major stumbling block.

Where WANs Go Bad
Take the most common WAN we use: The Internet. The Internet is an amazing infrastructure that connects nearly everyone to everyone else. It was designed from the beginning to be extremely robust, so that line cuts and equipment outages are automatically worked around. Its design philosophy and popularity are its limitations. The speed and quality of your connection can vary from minute to minute depending on traffic levels. The least costly connections, like cable and cellular, are shared, increasing the variability even more.

Invisible WANs
If you want the same performance over long distances that you have in-house, you need to order dedicated symmetrical wired, wireless and fiber point-to-point or multipoint services. Yes, a dedicated connection will help Internet performance greatly because most of the issues are in the “last mile” connection to your facility. Dedicated direct lines may make a huge difference in how business critical systems like VoIP telephone and software as a service in the cloud perform. MPLS networks provide similar high performance among multiple business locations, including remote data centers and cloud service providers.

The Almost Invisible WAN
The one sore point with dedicated lines is that can be a bit pricey, especially if you need a lot of bandwidth over very long distances. It’s a cost/benefit tradeoff. Dedicated wins for most medium and larger size businesses, where productivity losses and poor quality voice services are intolerable.

For smaller businesses and less critical applications, however, there is a fairly new alternative that makes the Internet perform more like a direct connection. This is called SDN or Software Defined Network, sometimes also referred to as a SD-WAN or Software Defined Wide Area Network. What the software does is combine multiple lower performing connections to produce a composite service that works much better. The SD-WAN monitors each WAN connection packet-by-packet and routes the most critical packets over the best performing links at that instant. It goes a long way toward making very noticeable Internet services more like invisible direct connections.

Are you frustrated by unacceptably poor Internet or other WAN services or have just hit the limit of your current bandwidth? Discover the range of competitive Wide Are Network connections that are now available for your business locations.

Will SD-WAN Eat MPLS?

By John Shepler

SD-WAN has become a hot service recently. It is often touted as an alternative or replacement for MPLS networks. Just comparing costs makes a compelling argument that SD-WAN may do to MPLS what MPLS did to Frame Relay. Is this really the case? Let’s take a look.

What Problem Are We Trying to Solve?
The issue is networking, specifically computer networking. Most of us have some need for computers as part of our job. That could be a traditional desktop computer, a laptop in a hotel room or conference center, or perhaps a tablet or or cellphone while we move around. It could also be a point of sale terminal, an industrial process controller, a 3D printer or just a laser printer in the office. All of these things need to be hooked together, or networked, or they just plain won’t work.

It’s actually worse than that. Remember when you bought software in a box? Not much software is sold that way anymore. Now everything is apps and they are delivered and updated virtually. The really heavy lifting software doesn’t even reside on your device. It’s at a remote data site or vendor’s platform. Without a connection, you can’t even run the application.

Private Lines: The Old Gold Standard
If you want to stay in complete control of every aspect of your network, you build your own for your exclusive use. Most companies do that internally. It’s when you leave the building that you have a problem. You need to hand off your packets to a service provider, or carrier, to transport them to another location.

The closest thing to stringing the wires yourself is to order private point-to-point circuits. T1, DS3 & OCx SONET are the traditional PTP circuits. More modern replacements are Ethernet over Copper and Ethernet over Fiber. All of these are still extremely popular with high performance, high security and high reliability. Cost and provisioning time are really the only issues.

MPLS Networks Save Money and Go Worldwide
You can approach the quality and security of private point to point lines using MPLS networks. MPLS or Multi-Protocol Label Switching is a replacement for the old-timey Frame Relay networks that were popular when high speed was 64 Kbps. It’s a privately run wide area network that handles multiple customers at the same time without them being aware of each other. Since the core network is shared, the cost is lower than running private lines to every satellite office you want to connect. Plus they’re already built-out, so you only need to provision an access line for each location.

MPLS networks are very popular for connecting companies with multiple business locations in the US or worldwide. Once again, they offer high performance, high security and high reliability. Also once again, cost can be an issue.

Why Not The Internet?
The lure of the Internet is strong. It’s the lowest cost of any method to reach anyone, anywhere in the world. However, there are issues.

Security is an obvious one. Just read the headlines any day and you’ll feel insecure about being online. Encryption, especially IPsec and SSL, make the risk acceptable for e-commerce and banking. However, performance is variable and out of your control. Latency, Jitter and packet loss are not only variable, they’re unpredictable. Companies running high performance business-critical applications wince at the thought of trusting their livelihood to the public Internet. Even so, the cost is really, really attractive compared with other solutions.

The Hybrid Network Compromise
Fact is, most companies need a broadband Internet connection for communications with suppliers and customers and access to the nearly unlimited news and information available online. A popular compromise is to use the MPLS network for internal communications and the Internet to go outside in a hybrid network arrangement.

Another use of the Internet is as a backup in case your private network fails. That happens enough with line cuts that it has a name: backhoe fade. If the broadband connection is just there on standby, all that bandwidth goes to waste most of the time.

SD-WAN Makes the Internet Suitable
The Software Defined Network (SDN) was invented to reduce the time and labor required to run complex networks. It “virtualizes” the network so you don’t have to deal with all the complexity of so many diverse routers, switches and appliances spread throughout the physical network.

SD-WAN or Software Defined Wide Area Network does the same thing for outside networks to connect far flung locations. SD-WAN manages multiple connections according to rules that you set up through a control panel. Once running it automatically directs traffic and works around problems without you having to get involved.

For instance, the SD-WAN can make use of Cable broadband, DSL, T1 lines, MPLS networks, LTE wireless, Satellite links and whatever else you have. It will monitor the characteristics of each path, in both the upload and download directions, for bandwidth congestion, packet loss, jitter and latency. It decides what path to use for each packet based on the instantaneous characteristics of the paths available. These can vary all over the place and change in milliseconds. You couldn’t possible keep up with all of this manually, but the SD-WAN system can stay on top of it.

With SD-WAN, you don’t need to waste the perfectly good bandwidth of your backup connection when the main link is running. SD-WAN will combine the bandwidths and make sure that the more critical apps, like VoIP and UC voice and video run on the best paths available and less critical file transfers use the lower performance paths.

Companies are finding that even having two diverse Internet broadband connections can give excellent performance compared with a single broadband service as long as they are being managed by SD-WAN. Two broadband services can easily cost only a fraction of even one private line for the same or less bandwidth. The core of the Internet usually runs pretty well. It’s the access connections, like WiFi and cable or DSL, that generally get flakey. Using SD-WAN to watch and select the best path at any given instant can dramatically improve the performance of the “virtualized” WAN network.

Is SD-WAN right for your business? You’d be remiss if you didn’t at least take a closer look at what connections are available and at what price for your particular business locations. Remember that you don’t have to go 100% on the Internet. SD-WAN will manage private lines, MPLS networks, satellite and wireless connections as well.

SDN Performance Takes a Leaf of Faith

By: John Shepler

If the cloud has done anything, it has turned a magnifying glass on once mundane WAN connections. Back in the day, it was OK for file transfers to take a bit too long or the Internet to be a little dicey. After all, the really critical operations were confined to the company LAN and in-house data center. No more. Once your services are hosted in the cloud, WAN performance becomes just as critical as LAN performance.

The New WAN Problem
There’s only one problem. YOU don’t own the WAN like you do your LAN wiring. You are at the mercy of wireless, cable, DSL, fiber and copper wireline service providers. Any issues in their networks have an immediate impact on your business.

How Do You Protect Yourself?
The answer is increasingly SDN or Software Defined Network solutions. SDN covers a lot of technology, but one very popular implementation for business is the integration of multiple, diverse WAN connections. You have several connections to the cloud, but they are coordinated by SDN.

Nature Knows How
Bigleaf Networks calls their process for doing this “Natural Networking.” They create a redundancy of connections with fault tolerance similar to how leaves protect themselves in nature. Here’s how Bigleaf explains their system:


Pretty clever, right? The SDN performance optimization that Bigleaf provides can also save you money. Without traffic management, many businesses wouldn’t even consider “best effort” broadband services like wireless, cable, DSL or low cost fiber options. The cost of outages and variations in performance was too great. The only acceptable WAN solutions were multiple dedicated private line services set up with automatic instant failover. These lines can get pretty expensive and you still have the headache of having to manage this system yourself.

Don't Do It Yourself
Bigleaf makes optimizing multiple Internet connections painless. They provide the managed router that tunnels traffic to their gateway clusters in the cloud. It’s all plug-and-play for you. For the ultimate in reliability, they even have an option to install redundant routers and switches at your site to match the redundancy of their cloud cluster.

Are you frustrated with the performance of your business broadband connection for cloud services? It’s time to take a closer look at what Software Defined Networks can do to improve both quality and reliability of your WAN services. Bigleaf technology is now offered by Telarus, along with services from over 50 data, voice and cloud providers. Discuss your issues and needs with an expert consultant now at no charge.

The Software Defined Network Comes to Austin

By: John Shepler

The Software Defined Network (SDN) has been one of those nebulous concepts that is coming someday to do something better than current IT technology. Well, that day has arrived and here’s what SDN is going to do for your company.

Why Software?
Like software everything, the software defined network is intended to replace fixed hardware functions with reprogrammable software. It’s not really a simplification process. The hardware may be more generic, like microprocessors and digital signal processors, but if you include the lines of code, the component count shoots through the roof. The beauty of software is that all those “soft” parts can be replicated instantly at little or no cost. Even more importantly, software can be changed from afar as needed.

The Idea of Virtualization
You’ve probably run into virtualization in the IT racks. Not that long ago, a server was a stand-alone computer with its own operating system and software load. Each server had a designated function. If it was overloaded, you needed to buy a more powerful computer and swap out the boxes. If the application wasn’t that demanding, the server would loaf along most of the time.

In this type of environment everything needs to be planned up-front and changes are time consuming and sometimes expensive. There’s also a poor utilization of resources. You may need a lot of lightly loaded servers all cooking in the racks in order to run your myriad of business applications.

Virtualization changes all that. The server is no longer a hardware appliance but a software function running on one or more processors. The computer hardware might not look much different, but what used to be one server may now be a dozen running on the same box. Huge applications might span several boxes to get the job done. It’s just a matter of how much in the way of resources an application needs.

Some of what virtualization has accomplished is to reduce the number of physical computers needed since each box is running at a higher capacity. Even more important, a new virtualized server can be installed in minutes since it is simply a software “instance” running on the hardware already in the racks. Don’t need a server anymore? Simply have the software release the resources back into the pool. You don’t even have to set foot in the data center to make this all happen.

Does this sound like “The Cloud”? Virtualization on a huge scale is the magic behind cloud data centers and cloud services.

Virtualization for the WAN
Now consider your telecommunications network connections. Like all hardware based approaches, there are many specialized functions implemented by very specific equipment cards and boxes. Some are in the central office, some in the network path and some at the customers premises. It takes a long time to provision a new service and get everything wired up correctly so that you get the service you pay for and don’t interfere with others or have them interfere with you. The term “nailed up” goes back to the days when physical copper wires were literally nailed up on a board while they were assigned to a particular customer.

If you’ve ever tried to upgrade service, you know what a pain it can be. You need to submit a new order that needs to be processed. The changes to the network for your extra bandwidth have to be engineered. Then a truck has to roll to your location delivering a CPE (Customer Premises Equipment) box with the proper interface for the new service. Bandwidth is typically available in major increments and you better get your order placed well in advance of running out of current capacity.

Now, what if the network could be virtualized like the servers? The hardware becomes more of a life support system for the software. That software can be changed, upgraded or supplemented at will. All of a sudden, network changes become fast and easy. That’s the software defined network.

What AT&T is Doing in Austin
AT&T is launching its software defined network in Austin, Texas with the moniker AT&T Network on Demand. That’s pretty much what it’s all about. Businesses will be able to increase or decrease the bandwidth of their broadband speeds in near real time. In olden days (before SDN) this could take hours maybe days in the case of Ethernet services or weeks or longer for legacy SONET and T-Carrier.

The Carrier Ethernet services over copper and fiber that have appeared on the scene recently were engineered with more of the software defined network idea in place. One of their bragging points is that you can usually get a bandwidth increase by simply calling your service provider and making the request over the phone. No need to keep watching out the window for the service truck to roll in. As long as you have enough port capacity, the carrier will make the changes “invisibly” while you are doing other things.

In fact AT&T’s SDN will let them provision new communication ports in days compared to weeks. That’s an extension of the software-defined philosophy that separates physical hardware from software. Once again, as long as the installed hardware has the capability of handling the demands placed on it, what it does is really a function of software parameters and apps. Look for this approach to expand rapidly throughout the industry. It will be a matter of competitiveness among the communication carriers and other service providers.

Are you limited by your current MAN or WAN network capability? The service offerings are changing fast. Chances are that you can get more capacity and flexibility without a cost increase with MAN and WAN Network Services available now.


Note: Photo of Austin, Texas at night courtesy of Daniel Mayer on Wikimedia Commons.